The AT2035 is a large-diaphragm, side-address condenser microphone. That means it uses a condenser capsule (capacitor-type), has a larger diaphragm for richer sound capture (as opposed to small-diaphragm mics),
Specifications
Parameter / Feature
Value
Microphone Type
Large-diaphragm, side-address, permanently-polarized condenser
Polar Pattern
Cardioid
Frequency Response
20 Hz – 20 kHz
Low-frequency Roll-off (High-Pass Filter)
80 Hz, 12 dB/octave
Open-Circuit Sensitivity
–33 dB (22.4 mV / Pa at 1 kHz)
Output Impedance
120 Ω nominal
Maximum Input Sound Level (SPL)
148 dB SPL (1 kHz, 1% THD); 158 dB SPL with –10 dB pad
Equivalent Noise (self-noise)
12 dB SPL (A-weighted)
Dynamic Range
~ 136 dB (at max SPL)
Signal-to-Noise Ratio (SNR)
~ 82 dB (1 kHz, 1 Pa)
Pad
–10 dB pad (switchable)
Phantom Power Requirement
11–52 V DC phantom power, 3.8 mA typical
Output Connector
XLR 3-pin (male)
Body / Construction
Solid-state condenser, rugged metal body, side-address design
Included Accessories
Shock mount (AT8458), stand adapter, protective pouch
Dimensions
Length ~ 170 mm (6.69”), Body diameter ~ 52 mm (2.05”)
Weight
~ 403 g (14.2 oz)
